Starter Kit - network management device - with AC power supplies - 10GbE, TDM, SONET, PDH, SDH - front to back airflow - 1U - rack-mountable
| Main Specifications | |
|---|---|
| Product Description | Cisco Network Convergence System 4202 - Starter Kit - network management device - with AC power supplies |
| Device Type | Network management device |
| Form Factor | Front to back airflow rack-mountable - 1U |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, TDM, SONET, PDH, SDH |
| Performance | Throughput: 60 Gbps ¦ Throughput: 95 Mbps |
| Power Over Ethernet (PoE) Supported | UPOE |
| Power | AC 100-240 V (50/60 Hz) |
| Power Redundancy | Yes |
| Dimensions (WxDxH) | 1.7 in x 17.5 in x 11.3 in |
| Weight | 12.41 lbs |
| Manufacturer Warranty | 90-day warranty |
| General | |
| Device Type | Network management device |
| Height (Rack Units) | 1U |
| Built-in Devices | GNSS receiver, temperature sensor |
| Width | 1.7 in |
| Depth | 17.5 in |
| Height | 11.3 in |
| Weight | 12.41 lbs |
| Expansion / Connectivity | |
| Expansion Slots | 1 (total) / 1 (free) x IM slot |
| Interfaces | 4 x 10GBase-X - SFP+ ¦ 4 x 1000Base-X - SFP (mini-GBIC) ¦ 8 x 1000Base-T - RJ-45 ¦ 1 x alarm intput - RJ-45 ¦ 1 x ToD timing port - RJ-45 ¦ 1 x management - RJ-45 ¦ 2 x USB ¦ 1 x GNSS - SMA ¦ 1 x PPS input timing port ¦ 1 x 10 MHz input timing port ¦ 2 x RS-232 |
| Manufacturer Warranty | |
| Service & Support | Limited warranty - replacement - 90 days - response time: 10 days |
| Miscellaneous | |
| MTBF | 466,660 hours |
| Compliant Standards | CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, ICES-003 Class A, EN 61000-4-5, EN 61000-4-11, EN 61000-4-8, UL 60950-1 Second Edition, ETS 300 753, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, CEM, CSA C22.2 No. 60950-1-07 Second Edition, VCCI Class A, GR-1244-CORE, EN 55022 Class A, FCC CFR47 Part 15 A, EN 300 386, KN35, GR-253-CORE, KN32 Class A, KN 61000-4-2, KN 61000-4-11, KN 61000-4-6, KN 61000-4-8, EN 300 753, ANSI T1.101, KN 61000-4-5, KN 61000-4-4, KN 61000-4-3, ITU-T G.781, ITU-T G.813, ITU-T G.823, ITU-T G.824 |
| Networking | |
| Form Factor | Rack-mountable |
| Airflow Direction | Front to back airflow |
| Connectivity Technology | Wired |
| Data Transfer Rate | 10 Gbps |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet, TDM, SONET, PDH, SDH |
| Routing Protocol | MPLS |
| Performance | Throughput: 60 Gbps ¦ Throughput: 95 Mbps |
| Status Indicators | Link/activity, fault |
| Features | Circuit Emulation (CEM), Layer 2 VPN (L2VPN) support, Layer 3 VPN (L3VPN) support, Segment Routing (SR), layer 3 switching, layer 2 switching, Pseudowire Emulation Edge to Edge (PWE3), Hierarchical Quality of Service (HQoS), Resource Reservation Protocol Traffic Engineering (RSVP-TE), Cisco Evolved Programmable Networks Manager (EPN-M), NAT support, PAT support, statistical multiplexing, Connectivity Verification, Synchronous Ethernet (SyncE), IP Security (IPSec) support, fan tray, Zero-touch provisioning (ZTP) |
| Power | |
| Power Over Ethernet (PoE) Supported | UPOE |
| Power Device | Internal power supply - hot-plug |
| Installed Qty | 2 |
| Max Supported Qty | 2 |
| Power Redundancy | Yes |
| Voltage Required | AC 100-240 V (50/60 Hz) |
| Power Consumption Operational | 130 Watt |
| Environmental Parameters | |
| Min Operating Temperature | -40 °F |
| Max Operating Temperature | 158 °F |
| Humidity Range Operating | 5 - 95% RH (non-condensing) |